G1/2 Ink Inlet And Outlet Pneumatic Diaphragm Pump Double Phase
QDM-901 double phase pneumatic diaphragm pump a new type of transportation machinery, using compressed air as a
power source for a variety of corrosive liquid, liquid with
particles, high viscosity, volatile, flammable, poisonous liquid.
The main feature of this pump is that without irrigation water, can
pumping liquid flow and some medium which is easy flow, avoiding
fire and explosion. Widely used in pharmaceutical, sewage
treatment, food, chemical, automobile, paint and other industries.
|Linking screws||State of the fluid|
|Ink Inlet||Ink Outlet||Air Inlet|
|One-way Pneumatic Diaphragm Pump||QDM-902||0.25-0.6(Mpa)||6M||14L||G1/4"||G1/2"|
|Two-way Pneumatic Diaphragm Pump||QDM-901||0.12-0.8(Mpa)||8M||26L||G1/2"||G1/2"||G1/4"||Zero|
The pump use air out of compressor as the driving force, adjust
the air to drive the diaphragm, aim to reach an transport of fluid.
The overall structure of the QDM-901 is more optimized, the pump
chamber and the main road are significantly strengthened, and the
selfpriming function and flow head are greatly improved.
1. Low gas consumption, medium flow regulation is stepless
2. Diaphragm is made of corrosion resistant material, can transport
a variety of corrosive medium.
3. Low failure rate, easy to install and convenient maintenance.
4. The pump shell is made of high quality material, internal parts
are made of stainless steel and copper, of all those make the pump
light, beautiful, stainless and anticorrosive.
Widely used in the printing industry, electroplating works, ink
painting, food, manufacturing, wastewater treatment, marine mining,
electronic chemicals, ceramic construction, fuel handling,
automotive and civil construction.
1 The pump must be mounted vertically, pay attention to the
direction of the arrow.
2 Connect hose to the ink port.
Why choose CBB Chuangbo
A. Reliable supplier in China
Established in 1995, CBB Chuangbo has been in machinery parts for
25 years, now we are biggest manufacturer of machinery parts in
B. Hight quality material
High quality of steel shell for the brake and imported powder for
longer life of the brake.
C. Cooling treatment
Insider there is a small cooling fan inside the brake, cooling the
tempreture and make the brake stable.
D. Quality control
We have the quality control system during the whole production
fromthe very beginning to the end and our principle is to make sure
each shaft is qualified.